TestMyGearSteering wheel test
Check steering, pedals, shifters and buttons across connected controllers.
Test guide & FAQsSteering wheel visualization
Connected controllers
Connect a controller and press a button to make it visible.
Current
Steering
Calculated from selected range
Control mapping
Choose a controller and input for each control. Move the control to identify it, then calibrate its endpoints.
H-pattern shifter
All raw inputs
Operate the physical controls and compare the browser values with your movements. Some devices or controls may not be exposed by the browser. Steering degrees are estimated from your selected range, not measured from the hardware. Force feedback is not tested.
Steering wheel test guide
Map and check browser-visible steering controls and shifters.
How to test
- Connect the devices and press a button on each controller.
- Map each control and calibrate its endpoints.
- Move the wheel, pedals and shifter and compare the live values.
Frequently asked questions
Why is a controller missing?
Check the connection, press a controller button and try a supported browser on HTTPS or localhost.
Can I use separate USB pedals?
Yes, when the browser exposes them as a controller, each control can use its own device.
Are degrees measured by the hardware?
The displayed angle is calculated from the selected range and calibrated input.
Does the page test force feedback?
No. The test reads browser-visible input and does not output steering force feedback.